Home > Products > BI-DNDC – Refractive Index Increment Analyzer

BI-DNDC – Refractive Index Increment Analyzer

  • BI-DNDC
  • DNDC_Software For Brookhaven
  • DNDCLightPath
  • BI-DNDC
  • DNDC_Software For Brookhaven
  • DNDCLightPath
All major features are user-programmable to achieve maximum flexibility.

The BI-DNDC is a deflection-type refractometer that may be purchased for use in either batch or GPC/SEC mode. In batch mode, the specific refractive index increment, dn/dc, is determined. This value is required as a parameter in molecular weight measurements using light scattering. In GPC/SEC mode, dn/dc is already known, and the instrument is used as a concentration detector for GPC/SEC applications.

The BI-DNDC can be set using the front panel controls and read using the LED readout or by an external computer. It includes a microprocessor, which allows user-friendly handling of all functions of the instrument, as well as refractive index and temperature data transfer to a personal computer via a standard serial interface.

Most importantly, the warm-up time for the BI-DNDC is only one hour, much less than other models on the market.

Features at a glance
  • Fast instrument warm-up, ~ 1 hour!
  • Sensitivity, 2.5×10-9
  • Autozero
  • Reference cell flush
  • 9 measurement ranges
  • DNDCW Windows™ software
  • Active temperature control to 80 °C
  • Wavelength selection: 620, 535 or 470 nm

Request to Quote

Overview

Determination of dn/dc

The dn/dc determination requires calibration of the batch mode instrument with a solvent/solute combination with known dn/dc, typically KCl in water. The calculated constant is not solvent-dependent and may be used for all further measurements. In batch mode, the instrument comes with BI-DNDCW software for use with an external PC. Included with the BI-DNDC instrument is a syringe kit with PEEK™ and Teflon ® tubing, fittings, and syringes.

The sample may be recovered and reconstituted if required. Typically, five or more concentrations, ranging from 0.1 to 10 mg/mL, are recommended. New instrument readings can be performed in a matter of minutes since it only takes ~ 0.5 mL of liquid to flush out the previous sample.

 

Determination of concentration

In this mode, the BI-DNDC serves as a highly sensitive concentration detector. Even better, with the right wavelength and the BI-MwA, the BI-DNDC becomes part of a system that eliminates GPC/SEC column calibration.

Specifications

Specifications

Cell Angle45°
Cell Volume (Batch Mode)8 µL
Dead Volume (Inlet to Cell/Cell to Outlet)GPC Mode Sample Cell: 0.25 µL, GPC Mode Reference Cell: 100 µL
Batch Mode Sample Cell100 µL: Batch Mode Reference Cell: 8 µL
Measurement Ranges (ΔRIU Full Scale)(GPC mode)6×10-4, 3×10-4, 1.5×10-4, 7.5×10-5, 3.75×10-5, 1.87×10-5, 9.3×10-6, 4.6×10-6, 2.3×10-6
no Range1.0 to 1.75 RIU
Sensitivity (GPC Mode)1.5 ng (Fructose in H2O)
Noise Level< 2.5×10-9, 25 °C
Temperature Accuracy± 0.5 °C
Temperature Stability± 0.01 °C
Temperature RangeAmbient to 80 °C
Specify Wavelength620 nm, 535 nm or 470 nm, factory set
Tubing I.D.: GPC Mode Sample Cell0.25 mm, GPC Mode reference cell: 0.5 mm; Batch Mode sample cell: 0.5 mm
Batch Mode Reference Cell0.5 mm
Flow Rate (typical/maximum)1.0/3.0 mL/min (Analytical Mode), 5.0/12.0 mL/min (Preparation Mode)
Time Constant0.1 to 2 seconds
Analog Signal Output1 and 10 volt bipolar, full scale
Digital Signal OutputRS-232/COM port
SoftwareBI-DNDCW for Batch Mode measurements
Data Transfer Rate (baud)4800, 9600, 19200, 38400, 57600, 115200
Digital InputsFlush, Zero, Sync, Error
Weight8 kg
Size160 x 175 x 340, mm
CertificationsCE Marked

A policy of continual improvement may lead to specification changes.

Options & Accessories

Accessories

BI-SFTK Syringes, fittings and tubing kit
BI-DNDCWWindows software for batch mode differential refractive index measurement

 

Download Brochure

Available Downloads

DNDC Brochure PDF

Speak To An Expert Today About Our Analytical Services

We’re standing by to help you select the right services for your characterization needs.